Extension Springs

CATALOG AND CUSTOM SPRINGS To design or search for a particular type of spring click on a picture below. Compression Springs Extension Springs Torsion Springs MSDivisions 14 Montgomery Street Middletown, NY 10940 Toll free 800-633-7734 Local 845-343-9078 Fax 845-344-2175 Email Click Here

Web Site Status

Welcome to our new, faster and safer server Until 5/3/2021 you can also switch to our old site It is still safe, and fully functional, (including orders and spring design) and you need not use a credit card to place orders.

Call 800-633-7734 for assistance. Note: minimum order is $35

CUSTOM SPRINGS: Send a print for quotation Spring Calculator Contact Tech Support   SIMPLE MEASUREMENTS Dial Calipers are more accurate But follow this and you can use a tape measure to pick good prospects   CATALOG SPRINGS: Locate extension springs by dimensions English Units Page:......Outside Diameter: 146:..........0.063 INCH O.D. 147:..........0.094 INCH O.D. 148:..........0.120 INCH O.D. 149:..........0.180 INCH O.D. 150:..........0.240 INCH O.D. 151:..........0.300 INCH O.D. 152:..........0.360 INCH O.D. 154:..........0.420 INCH O.D. 155:..........0.500 INCH O.D. 156:..........0.650 INCH O.D. 157:..........0.750 INCH O.D. 158:..........0.850 INCH O.D. 159:..........1.000 INCH O.D. 161:..........1.125 INCH O.D. 162:..........1.250 INCH O.D. 163:..........1.500 INCH O.D. 164:..........1.750 INCH O.D. 165:..........2.000 INCH O.D. Locate METRIC extension springs by dimensions Metric Units Page:......Outside Diameter: 420:..........2.5 MM O.D. 421:..........3.0 MM O.D. 422:..........4.5 MM O.D. 423:..........6.3 MM O.D. 424:..........8.0 MM O.D. 425:..........9.5 MM O.D. 426:..........12.5 MM O.D. 427:..........19.0 MM O.D. Locate stock springs by part number Part number search Complete or Partial numbers Yours, ours, or others Customer part numbers available only if provided and logged in. Competitor number are as available MSD Part Numbers - include dashes Competing catalogs - omit dashes MS24585/6 - dashes optional MS4586: MS24586 Part number search EXTENSION SPRINGS Add your dash number to the above. MS24586 Number system * Plain carbon steel (Music Wire) numbers from 1 to 354 * Stainless Steel (302) numbers from C1 to C3547 * Zinc plate ** numbers from 1001 to 1354. * Cadmium plated numbers from 501 to 854 * Other materials and finishes are considered custom springs. ** MS24586 does not have part numbers for all zinc plated configurations, however they are available. Search Options * You can search for a specific dash number. * Submit as is to get a complete list. * Enter a "C" to get all Stainless steel numbers Spring End Configuration * Ends loops may be cross over center or machine looops.